RNS 510 FIRMWARE 5238 with Video in Motion & Test mode Enabled CD

RNS 510 FIRMWARE 5238 with Video in Motion & Test mode Enabled CD Description

RNS 510 FIRMWARE 5238 UPGRADE with Video in Motion & Test mode Enabled

To see what firmware you have:
Hold setup button 4 sec and then Version...
 
Don't have the engine on and don't have the key in the car when you do the firmware upgrade - very important!
It is good to have a car charger, the upgrade takes about 50 min...

v5238 software update - with Video In Motion & TestMode enabled

Disclaimer.: There is a possibility that the Music Data and Maps may get deleted from the HardDisk Drive, therefore you may need to reinstall your Maps DVD!

Be sure the DVD unit is not damaged and read correctly CD/DVD medium.

We accept no responsibility for any damage.

Everyone can use firmware 5238 and newest maps

- You can always use firmware 5238 on any device from 2005 to October 2013 (with HDD). * Hardware C3-C12 *
- You can update directly to 5238 with no need for an update in between
- This firmware has VIM & Test mode enabled ( Video In Motion)

Choose from the following firmware versions to match your hardware:

1. Firmware 5238 (for C3-C12)

2. Firmware 5274 (for C6)

3. Firmware 6276 (for C14)

 Compatible Hardware Units:

Volkswagen RNS 510 Hardware and Software (firmware) Versions:

HW Vehicle: 0xC001 – HW Radio: 0003

C3/C4

1T0 035 680 (1T0035680)

1T0 035 680 A 1T0035680)

Firmware version (when hardware last produced): 1200

Firmware version (unmodified releases): 1200

Firmware version (modified releases): 5238

HW Vehicle: 0xC201 – HW Radio: 0004

C6/C7

1T0 035 680 B (1T0035680B)

Firmware version (when hardware last produced): 1300

Firmware version (unmodified releases): 1300

Firmware version (modified releases): 5274

HW Vehicle: 0xC801 – HW Radio: 0006

C8/C9

1T0 035 680 C (1T0035680C)

Firmware version (when hardware last produced): 2660

Firmware version (unmodified releases): 2840

Firmware version (modified releases): 5274

HW Vehicle: 0xC801 – HW Radio: 0006

C10/C11/C12

1T0 035 680 D (1T0035680D)

1T0 035 680 F (1T0035680F)

1T0 035 680 G (1T0035680G)

1T0 035 680 H (1T0035680H)

1T0 035 680 J (1T0035680J)

Firmware version (first and last release when manufactured): 3970 to 5269

Firmware version (unmodified releases): 5274 (5238)

Firmware version (modified releases): 5274 (5238)

HW Vehicle : 0xCA01 – HW Radio: 0006

C12

1T0 035 680 D (1T0035680D)

1T0 035 680 H (1T0035680H)

1T0 035 680 J (1T0035680J)

Firmware version (first and last release when manufactured): 4120 to 5269

Firmware version (unmodified releases): 5274 (5238)

Firmware version (modified releases): 5274 (5238)

HW Vehicle : 0xCE01 – HW Radio: 0006

C14

1T0 035 680 T (1T0035680T)

1T0 035 680 R (1T0035680R)

1T0 035 680 S (1T0035680S)

1T0 035 686 G (1T0035686G)

1T0 035 686 E (1T0035686E)

1T0 035 686 F (1T0035686F)

Firmware version (first and last release when manufactured): 6270 to xxxx

Firmware version (unmodified releases): 6276

Firmware version (modified releases): 6276

________________________________

Before buying check your hardware version, there are many different versions:

5238 (compatible with all units) 

Hardware C3 to C12 can use firmware versions to 5238

Hardware C6 to C12 can use firmware versions to 5274.

Hardware C14 can use firmware 6276. 

6276 compatible only with C14 hardware starting from November 2013 (with SSD)

Firmware and Map Compatibility:

• Firmware 5238, 5274, and 6276 can be used with most hardware devices from 2005 to October 2013 (with HDD).

• Directly update to firmware 5238 with no need for intermediate updates.

• Updating the firmware version will not reset your coding settings, except for certain SEAT devices from 2007-2008.

 Not Sure About Compatibility?

If you're uncertain about whether this firmware update is suitable for your navigation system, don't hesitate to contact us. You can also send a photo of your navigation system's software version, and we'll assist you in finding the right update.

Please Note:

• This product includes firmware updates only; maps are not included.

• Compatibility with your specific RNS 510 navigation unit may vary, so please contact us if you have any doubts or questions regarding compatibility.

 Key Changes and Features in This Update:

• Voice Control (microphone required)

• DAB+ Support (from firmware version 5xxx)

• DAB Support (from firmware version 4xxx)

• Radio Text

• Faster navigation and user interface

• Automatic illumination control

• Enhanced destination input

• Additional menus accessed by holding down the setup button

• Compass

• Support for new languages: Arabic, Russian, Turkish, and Polish

• Speed Limit Display

• Stability Improvements

• Faster Startup (from firmware version 2720 onwards)

• Display OPS (Optical Parking System) and RVC (Rear-View Camera) at the same time

• Support for SDHC 32 GB (hardware version 04 and above)

• Display Off option on extras tab

• Climatronic control if compatible climatronic system is fitted

• Clock display when RNS 510 is switched off

• Excluded roads (under route options)

• Entry of GPS coordinates

• Additional adjustments for video

• Larger RVC screen with transparent menus at the side

Compatible Units:

This firmware upgrade can be applied to various units, including those marked with D and later versions.

Upgrade your Volkswagen RNS 510 navigation system with the latest firmware to enjoy improved features and better performance. Please ensure compatibility with your hardware before proceeding. For any questions or assistance, don't hesitate to Contact Us.

Upgrade your navigation system today and enjoy a smarter and more efficient driving experience!

SOLUTION FOR ERROR MESSAGE -  SWL CD detected but invalid clamp state

SWL CD detected but invalid Clamp State-please remove the CD and either
a) change the steam state to hour and re-insert the CD or
b) press any of the buttons to continue with normal operation.

A little tip, if the error message comes with "Clamp State invalid ... hour mode":RNS 510 FIRMWARE 5238 UPGRADE with Video in Motion & Test mode Enabled

To see what firmware you have:
Hold setup button 4 sec and then Version...
 
Don't have the engine on and don't have the key in the car when you do the firmware upgrade - very important!
It is good to have a car charger, the upgrade takes about 50 min...

v5238 software update - with Video In Motion & TestMode enabled

Disclaimer.: There is a possibility that the Music Data and Maps may get deleted from the HardDisk Drive, therefore you may need to reinstall your Maps DVD!

Be sure the DVD unit is not damaged and read correctly CD/DVD medium.

We accept no responsibility for any damage.

Everyone can use firmware 5238 and newest maps

- You can always use firmware 5238 on any device from 2005 to October 2013 (with HDD). * Hardware C3-C12 *
- You can update directly to 5238 with no need for an update in between
- This firmware has VIM & Test mode enabled ( Video In Motion)

Choose from the following firmware versions to match your hardware:

1. Firmware 5238 (for C3-C12)

2. Firmware 5274 (for C6)

3. Firmware 6276 (for C14)

 Compatible Hardware Units:

Volkswagen RNS 510 Hardware and Software (firmware) Versions:

HW Vehicle: 0xC001 – HW Radio: 0003

C3/C4

1T0 035 680 (1T0035680)

1T0 035 680 A (1T0035680A)

Firmware version (when hardware last produced): 1200

Firmware version (unmodified releases): 1200

Firmware version (modified releases): 5238

HW Vehicle: 0xC201 – HW Radio: 0004

C6/C7

1T0 035 680 B (1T0035680B)

Firmware version (when hardware last produced): 1300

Firmware version (unmodified releases): 1300

Firmware version (modified releases): 5274

HW Vehicle: 0xC801 – HW Radio: 0006

C8/C9

1T0 035 680 C (1T0035680C)

Firmware version (when hardware last produced): 2660

Firmware version (unmodified releases): 2840

Firmware version (modified releases): 5274

HW Vehicle: 0xC801 – HW Radio: 0006

C10/C11/C12

1T0 035 680 D (1T0035680D)

1T0 035 680 F (1T0035680F)

1T0 035 680 G (1T0035680G)

1T0 035 680 H (1T0035680H)

1T0 035 680 J (1T0035680J)

Firmware version (first and last release when manufactured): 3970 to 5269

Firmware version (unmodified releases): 5274 (5238)

Firmware version (modified releases): 5274 (5238)

HW Vehicle : 0xCA01 – HW Radio: 0006

C12

1T0 035 680 D (1T0035680D)

1T0 035 680 H (1T0035680H)

1T0 035 680 J (1T0035680J)

Firmware version (first and last release when manufactured): 4120 to 5269

Firmware version (unmodified releases): 5274 (5238)

Firmware version (modified releases): 5274 (5238)

HW Vehicle : 0xCE01 – HW Radio: 0006

C14

1T0 035 680 T (1T0035680T)

1T0 035 680 R (1T0035680R)

1T0 035 680 S (1T0035680S)

1T0 035 686 G (1T0035686G)

1T0 035 686 E (1T0035686E)

1T0 035 686 F (1T0035686F)

Firmware version (first and last release when manufactured): 6270 to xxxx

Firmware version (unmodified releases): 6276

Firmware version (modified releases): 6276

________________________________

Before buying check your hardware version, there are many different versions:

5238 (compatible with all units) 

Hardware C3 to C12 can use firmware versions to 5238

Hardware C6 to C12 can use firmware versions to 5274.

Hardware C14 can use firmware 6276. 

6276 compatible only with C14 hardware starting from November 2013 (with SSD)

Firmware and Map Compatibility:

• Firmware 5238, 5274, and 6276 can be used with most hardware devices from 2005 to October 2013 (with HDD).

• Directly update to firmware 5238 with no need for intermediate updates.

• Updating the firmware version will not reset your coding settings, except for certain SEAT devices from 2007-2008.

 Not Sure About Compatibility?

If you're uncertain about whether this firmware update is suitable for your navigation system, don't hesitate to contact us. You can also send a photo of your navigation system's software version, and we'll assist you in finding the right update.

Please Note:

• This product includes firmware updates only; maps are not included.

• Compatibility with your specific RNS 510 navigation unit may vary, so please contact us if you have any doubts or questions regarding compatibility.

 Key Changes and Features in This Update:

• Voice Control (microphone required)

• DAB+ Support (from firmware version 5xxx)

• DAB Support (from firmware version 4xxx)

• Radio Text

• Faster navigation and user interface

• Automatic illumination control

• Enhanced destination input

• Additional menus accessed by holding down the setup button

• Compass

• Support for new languages: Arabic, Russian, Turkish, and Polish

• Speed Limit Display

• Stability Improvements

• Faster Startup (from firmware version 2720 onwards)

• Display OPS (Optical Parking System) and RVC (Rear-View Camera) at the same time

• Support for SDHC 32 GB (hardware version 04 and above)

• Display Off option on extras tab

• Climatronic control if compatible climatronic system is fitted

• Clock display when RNS 510 is switched off

• Excluded roads (under route options)

• Entry of GPS coordinates

• Additional adjustments for video

• Larger RVC screen with transparent menus at the side

Compatible Units:

This firmware upgrade can be applied to various units, including those marked with D and later versions.

Upgrade your Volkswagen RNS 510 navigation system with the latest firmware to enjoy improved features and better performance. Please ensure compatibility with your hardware before proceeding. For any questions or assistance, don't hesitate to Contact Us.

Upgrade your navigation system today and enjoy a smarter and more efficient driving experience!

SOLUTION FOR ERROR MESSAGE -  SWL CD detected but invalid clamp state

SWL CD detected but invalid Clamp State-please remove the CD and either
a) change the steam state to hour and re-insert the CD or
b) press any of the buttons to continue with normal operation.

A little tip, if the error message comes with "Clamp State invalid ... hour mode":

1. CD out
2. Ignition off
3. Hard Reset (press the two buttons to the left of the DVD tray + the right button to the right of the DVD tray)
or Soft Reset (press the two buttons to the right of the DVD tray + SETUP button)
4. Wait until finished booting up
5. Setup, system, time setting from 24 to 12h
6. SW CD in and off you go ...)

You will have to perform all the procedures correctly.
We are not responsible in case something goes wrong during the installation and damages your device.

1. CD out
2. Ignition off
3. Hard Reset (press the two buttons to the left of the DVD tray + the right button to the right of the DVD tray)
or Soft Reset (press the two buttons to the right of the DVD tray + SETUP button)
4. Wait until finished booting up
5. Setup, system, time setting from 24 to 12h
6. SW CD in and off you go ...)

You will have to perform all the procedures correctly.
We are not responsible in case something goes wrong during the installation and damages your device.