Sorry, this item is temporarily out of stock.
RTS5170 Card Reader with REALTEK EMMC EMCP Boot (Driver Installation Required) with Card Port
Similar Products we think you'll like
Would you like us to let you know when it's back?
Summary
- The board requires a driver for operation.
- The default shipment includes only the board, without any additional accessories.
- Special attention is needed when performing EMMC flashing.
- The DET pin must be connected to the adjacent GND for device detection.
- This card reader is designed to operate TF cards or SD cards, and no support is provided for EMMC flashing writes.
RTS5170 Card Reader with REALTEK EMMC EMCP Boot (Driver Installation Required) with Card Port Description
The board requires a driver for operation.
The default shipment includes only the board, without any additional accessories.
Special attention is needed when performing EMMC flashing.
The DET pin must be connected to the adjacent GND for device detection.
This card reader is designed to operate TF cards or cards, and no support is provided for EMMC flashing writes.
Please be informed. This board requires a driver to be used. Special attention: When doing EMMC flashing, the back of the board should be connected to the adjacent GND, which is the detection pin of the device. Our store uses this card reader to operate TF cards or cards, and does not provide any support for flashing EMMC writes.
Color: As Shown
Material: plastic
Package Contents:
1*Card Reader
Details
| OPC | PTFZRVJ |
|---|---|
| Brand | Brecantia |
| Codes | 4712932429939 (EAN) |
Product Data
| Height | 1cm |
|---|---|
| Width | 2cm |
| Length | 6cm |
| Weight | 0.0065kg |
| Colour | As Shown |
| Material | Plastic |
Would you like us to let you know when it's back?
RTS5170 Card Reader with REALTEK EMMC EMCP Boot (Driver Installation Required) with Card Port