Siding Mounting Block Vinyl Mount Plate Kit with Electrical

Siding Mounting Block Vinyl Mount Plate Kit with Electrical Description

About this item Siding Mounting Block: Outdoor light siding mount block fit for 4 Inch height siding, 1/2 inch lap double. Siding mounting kit provides for a smooth vertical mounting of light fixtures on all siding types including T-111, Hardie Plank lap siding, and flat surfaces. High Quality Siding Block: The siding mounting block is made of solid UV rated plastic, long outdoor lifeas well and good snug fit on for siding. Vinyl siding light mounting blocks with lots of options for the wiring to pull through to the lamp, it makes adding new lighting to existing siding more easy. Warm Tips: To stop water from penetrating the electrical box, your must caulking the top of the box except the drainage hole on the bottom. For a more complete job, you may also paint the fixture to finish with your desired colors. Siding mounting kit include: 1 vinyl siding light mounting block, 1 cable connectors and 4 siding mounting screws. Easy to Install: The siding light mounting block is very easy to install, whether you have siding up or not. 1. Drill the hole through the siding lap to put a wire through the hole outside. 2. Remove the knock-out from the electrical box and insert the cable connector into the hole. 3. Put the wire through the cable connector and mount the box up with the included couple srcews. 4. Put the outside light in place on the electrical box. After Sales Support: If you have any questions or concerns about our exterior light siding mounting block 8141dbl, please do not hesitate to contact us. We will do our best to provide you with a satisfactory shopping experience.