Smart Car Injector Tester Automotive Cleaning Tool Kit Flush Cleaner System Scan

Smart Car Injector Tester Automotive Cleaning Tool Kit Flush Cleaner System Scan Description

100% new and high quality.
This injector tester can be used to help identify stuck, leaked or burned out conditions,it uses 12V vehicle battery for power.
Large LED display/4 Pulse Modes. Test Lead: 41.5cm / 16.3 inches.
It can work with any pressure tester, easily to clean most car motorcycle injectors.
It help us clean and test the injectors of gasoline cars and motorcycles. The engine of the car must be turned off before using this instrument.

Specifications:
Power Supply: 12V vehicle battery
Operation Environment: 0-40C,relative humidity Less than 80%
Storage Environment: -20C -50C, relative humidity Less than 85%
Explanations for 4 modes:
Mode 1: the tester outputs 1 pulse, whose pulse width is about 255ms
Mode 2: the tester outputs 50 pulse, every pulse's pulse width is about 7ms
Mode 3: the tester outputs 100 pulse, every pulse's pulse width is about 3.5ms
Mode 4: the tester outputs pulse continuously at the rate of 50 pulses per about 1450ms, every pulse's pulse width is about 7ms
Colour:grey
Material:ABS

Package Contents:
1 * Smart Car Injector Tester

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.