Solar Motion Sensor Floodlights 6500K, 180 LED, IP65, with Remote—White, 2-PCS

Solar Motion Sensor Floodlights 6500K, 180 LED, IP65, with Remote—White, 2-PCS Description

Product description None None None None None Drill holes the chosen surface. Hammer the plastic plugs into the holes and using screw driver firmly. U-shaped opening is upwards, then use screws to fix mounting bracket. Insert the light into the bracket(Solar panel the same). Connect to the solar panel and light panel, then twist to tighten. From the brand 1. Motion Sensor: This solar outdoor floodlight motion sensor built with 6500K and 1000LM, which in light sensor and PIR detection sensor; 2200mAh has a larger capacity to provide efficient and lasting lighting 2. IP65 Outdoor Solar Floodlight : The light is made of heat-resistant high-quality ABS material and the solar panel of the solar light is sturdy ; the wire connections are sealed, so with IP65 it still works well in any weather condition especially in rainy or cold days or hot summer 3. Use in 3 Modes: Single click the button to the following 3 modes and turn off the light [Mode 1 Off--Off Mode] Turn by motion triggering in night and turn off after 20s [Mode 2 Dim--Dim Mode] Turn at night and stay at low brightness, then turn to full brightness if motion is detected [Mode 3 Dim Light Mode] Turn lasting 6 hours in darkness or night, auto to mode 1 after 6 hours 4. Easy Installation Method: You can easily install it with split installation or -in-one installation, please insure install it in a place where it can get sunlight at daytime. With sensing angle 120and sensing distance 26 ft you can confidently engage in nighttime activities 5. Guarantee Service: We are responsible for our high-quality products. If you have any question, please contact promptly and we will provide you with a satisfactory response as soon as possible.