Square LED Plinth Light Kit 5 NATURAL WHITE Spotlights Kitchen Bathroom Panel

Square LED Plinth Light Kit 5 NATURAL WHITE Spotlights Kitchen Bathroom Panel Description

LED Plinth Kit

What is included:

5x Square Plinth Lights
1x Driver â" Converts mains into 12Vdc and power all lights from 1 source

Technical Specification:

LIGHT

Light Colour Appearance â"Natural White
Colour Temperature â" 4000÷4500 Kelvin
Luminous Efficacy â" 45lm/W
Power Supply â" 12Vdc
Wattage (per light) â" 1.5W
Cable Length 1.5m
Number of Hours â" 20,000
IP20

DRIVER

Voltage â" 12Vdc
Wattage â" 15W
6 Way / Port

What is a Driver?

A driver converts mains voltage (240V AC) to 12V DC. Our range of efficient kitchen lights run on a low voltage, this conserves energy without compromising on luminosity. Every light that we sell has a wattage rating. For example, if you have a light rated at 2.6W and you have 3 of them, your total wattage consumption would be 7.8W. To put this simply, your driverâs wattage rating must be equal to or greater than 7.8W in order for this to work (pulling through more watts than a driver is rated to will cause the driver to blow).

We know that this can sound a little tricky so in order to save you the hassle of working this out, all our light kits include a driver that is specifically designed to work safely and efficiently with your chosen lights.

Overview:

Our LED plinth lights are perfect for modernising any kitchen, bathroom or any other rooms. They are ideal for skirting boards, kick boards and panels, they create a unique form of lighting. They can also be installed within kitchen cabinets as down lights as pictured above. They are ideal for use in bathrooms & kitchens due to them being IP20 rated.

This plinth kit is finished in stainless steel giving a stylish edge to any room & they produce a natural white lighting beam.

These LEDâs will last over 20,000 hours, on average they will last 10 years. After this time the bulbs will only reduce in brightness (to 70% of their original luminosity), meaning they will still work. Making this set of LED's environmentally friendly and cost effective.

How to mount:

These lights are surface mounted and have a strong self-adhesive backing. To put this simply, you do not need any tools to mount our lights. Simply peel back the 3M double sided tape and mount to your chosen surface. (ensure surface is flat and has been cleaned prior to mounting).

Then run the cables from the light and plug them directly into the supplied driver. The power converter (driver) can then be connected straight to the mains and controlled via a light switch. It is incredibly simple to install and the unit is supplied with a full set of instructions. If you are not confident enough to do this yourself, please refer to an electrician for advice.

Further information:

If you require more than a 2m run from your light to the power converter we sell a 2m extension cable which is suitable to extend the run. Please search our shop or feel free to get in touch.

We sell various plinth lights, please search our shop. If you require any further help or advice in relation to our LED plinth lights please feel free to get in touch