(Stone) Birdgo 50mm Pigeon Netting 10m x 5m

(Stone) Birdgo 50mm Pigeon Netting 10m x 5m Description

Birdgo Professional Pigeon Netting

50mm Pigeon control prevention barrier system

Please select colour from the dropdown menu.

• Colour: White, Black or Stone
• Size: 10m x 5m
• Material: HDPE UV stabilised twine 12/6

This listing includes white 50mm bird control netting to control pigeons and other similar sized pest species.

50mm bird netting is specific to certain types of bird species, including pigeons, and will not be suitable for other smaller or larger birds.

Pigeon netting is recommended for proofing against mammals, including cats and small dogs.

Birdgo Professional Bird Control Netting

Birdgo bird netting has been specifically designed to stop birds from gaining access to prohibited locations where they may become pests. Such locations including building facades, internal light wells, rooftop plant rooms and any other locations that birds can perch, roost or nest.

Netting is suitable for preventing birds to larger open areas or where other types of bird control measures may not be economical to undertake. When installed correctly, bird netting can blend into the background and, when visible, aesthetically pleasing.

Use the following guide to select which net is most suitable for the target pest bird:

• 19mm = Prevent Sparrows
• 28mm = Prevent Starlings
• 50mm = Prevent Pigeons
• 75mm = Prevent Seagulls

We supply netting in 3 colours: Black, Stone and White (aka translucent) 

Black is our most popular colour as this will normally blend into the majority of environments. We all sell stone, which is an excellent choice for both sandstone facades, tree canopies, and woodland settings. White netting is recommended for use against lighter surfaces or when installed over visible rooftops.

Birdgo bird nets are manufactured in the United Kingdom from polyethylene which does not absorb water, does not stretch and is chemically inert. All Birdgo nets are UV light stabilised and have been designed to last more than 10 years.

Our bird nets are constructed from mono-filaments designed specifically for bird net systems.

• Twine Breaking Strength: 14kg - far stronger than the loop style woven netting.
• Twine Construction: 0.30mm thick monofilament HDPE, which is then twisted x2, and then x 3 to make the finished twine approx 1mm in diameter, with a 12/6 construction.

For a successful long-term prevention control system, it is important that any bird netting installation is carried out correctly and specific to the target bird. Installing the wrong type of netting can cause unnecessary distress to the bird.

While the installation of the net will vary depending on the prevention area and bird controlled, most installs will require a simple bird frame system for the netting to be attached correctly. A bird frame system is a length of wire that has been placed under tension using a device called a barrel strainer, creating an easy way to attach netting to prevent sag.

Fixing points for the wireframe is extremely important for the overall strength and success of the system. Strong 'corner' fixings should be spaced at 5m intervals through the install and all inward corners and where additional support wires may be required. Intermediate fixings should be installed at specific points between the corner fixings. For 50mm & 75mm netting, this should be no greater than 1m; for starlings, 0.5m and sparrows 0.3m.

Weather is a concern when installing netting and should be taken into consideration when installing nets. Whilst netting does not absorb water, it is common for water and snow to weigh down any netting installs. Wind can also be an issue, especially for installed systems on rooftops and other exposed environments. Installers should always design their frame system to handle these additional forces.

A wide range of Birdgo fixings and starter kits are also available.