to SAS Expansion Card Adapter 6Gbps (7&15)

to SAS Expansion Card Adapter 6Gbps (7&15) Description

1. new and high quality.
2. It is convenient to use.
3. Portable design, light weight.
4. Safely connect it to your 2.5/3.5inch sas hdd devices.

Input Interface: 22PIN (7+15PIN)
Output Interface: SAS 29PIN
Speed: 6Gbps
Support System: WIN7,WIN10,WIN11, Linux OS
Kind Tips:
Only support 2.5/3.5inch SAS HDD SSD, NOT Support U.2 SSD.
If the disk is not recognized, try another interface.
Installation steps:
1. Turn off the computer and disconnect the power cord.
2. Open the computer case and find the 7PIN slot and SATA15PIN power cable that can be used.
3. Gently insert the adapter card into the SAS hard drive and make sure it is firmly fixed in the hard drive position of the chassis.
4. Insert the cable and the hard drive power cable into the adapter card, and insert the other end of the data cable into the motherboard port.
5. Re-close the computer case and reconnect the 220V power cord.
6. Start the computer and check whether the newly added device is successfully recognized in the .
Colour:Black
Material:PCB+Plastic

Package Contents:
1 x to SAS HDD Expansion Card

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.