VC5402 Digital Dial Indicator Inch/Metric Thickness Gauge

VC5402 Digital Dial Indicator Inch/Metric Thickness Gauge Description

1、With dimensional measurement and form and position tolerance detection functions. 2、LED LCD high‑definition display, digital readings are clearer and more accurate. 3、Metric/inch conversion key, each time it is pressed, it will switch between metric and inch display. 4、Small size, light weight, convenient to carry and use more convenient and fast. 5、Using high‑quality aluminum alloy + plastic + copper material, durable and long service life.
Item Type: Dial Indicator
Material: Aluminum Alloy + Plastic + Copper
Color: As shown in the picture
Model: VC5402
Battery: 3V CR2032 x 1 (not included)
Application: Surveying, Mapping and Ranging
Basic Parameters:
1. Digital display, with functions such as size measurement and form and location tolerance detection
2. Working Temperature: 0~+40 Storage temperature: -10~+60
3. Environmental Humidity: 80%
4. Support Data Transmission
Range(mm)
Resolution
Accuracy(mm)
Throat Depth(mm)
0-10
0.01mm/0.0005in
0.03/0.0012in
30120
0-10
0.001mm/0.0005in
0.009/0.0036in
30120
0-25
0.01mm/0.0005in
0.03/0.0012in
30120
How to Use:
1. When the small font "5" and "in" are displayed on the display, it is displayed in English.
2. mm/ in: metric and inch conversion key. Each time you press this key, a metric and inch display conversion will be performed.
3. ON/OFF: Power switch key.
4. SET/ZERO: Set and clear keys. Short press once to clear the display data. When there is a preset number, the preset number will be displayed: long press this key, the word "SET" will flash on the top of the display screen, and enter the preset number setting mode. Set a preset number through the upper "pre-" and "pre+" keys.
5. pre-, pre+ keys: When setting the preset number, short press to realize data subtraction and increase, and long press to realize data continuous subtraction and continuous addition.
6. TOL: Tolerance setting key. Press this key once to enter the tolerance setting state, display the upper tolerance symbol, push the measuring rod to the upper tolerance position that needs to be set, press the "TOL" key, keep the current value as the upper tolerance and display the lower tolerance symbol, slide the measuring rod down to the required To set the lower tolerance position, press the "TOL" key again to exit the tolerance setting state and start the tolerance judgment. According to the judgment, it will display "OK" or flash the upper and lower tolerance symbols. If the upper tolerance is not greater than the lower tolerance, the setting is invalid and the tolerance judgment is not performed.
7. There is dirt such as dust on the measuring rod, which will affect the movement of the measuring rod, so please wipe it with a clean rag without oil before use. Do not apply oil on the measuring rod.
8. A stand or other fixtures are required when using the digital indicator. It is recommended to use standard fixtures with φ8H7m mounting holes.
1 x Dial Indicator(Battery Not Included)
1 x Plastic Box
1 x Instruction Manual