Water Heating Temperature Controller with DN15 Valve and

Water Heating Temperature Controller with DN15 Valve and Description

Feature: *Liquid crystal thermostat: With the popularity of intelligence, intelligent control systems are also becoming more intelligent, and central controllers and room temperature controllers have become core supporting products for system intelligence. Thermostats are divided into two types: mixed water thermostats and floor heating thermostats . As people improve their quality of life, traditional heating methods are changed in winter heating. Heating equipment is installed in the floor. The heat is emitted from the ground to make people feel more comfortable. The smart thermostat is an end control product developed to control this heating equipment. It can set the power on and off or the room temperature in different periods according to people's needs, thereby realizing intelligent heating. *Straight automatic thermostatic control valve: It is a special valve for radiators. It consists of two parts: a thermostat controller and a valve body. The user turns the thermostat controller to the required set temperature. When the indoor temperature exceeds the set temperature, the thermostatic controller's internal temperature bulb (filled with temperature-sensing medium) expands due to heat, increases in volume, and pushes the valve stem. Close the valve, reduce the water inlet flows of the radiator, and make the room temperature reach the set temperature. When the indoor temperature is lower than the set temperature, the thermometer bulb shrinks due to cold, the volume decreases, and the valve core return spring pushes back the valve stem, causing the The valve is opened wide, increasing the water flows into the radiator, until the room temperature reaches the set value and the indoor temperature can be set as required. *Multiple industry applications and scope: suitable for office buildings, shopping malls, hotels, schools, hospitals, residential areas, agricultural and drinking water renovation, government projects, etc. Specification: 1.Electrothermal actuator Control mode: normally open/normally closed Engineering voltage: 230V (220V), AC24V10V Ambient temperature: -5-60 Power consumption: 2VA Shell material: flame-retardant PC (inner parts are flame-retardant reinforced PA66) Full process time: 3-5mm Thrust: 110N Connection size: M30x1.5mm nut Leads length: 90mm Stroke: 3mm Installation method: The installation position is vertical to 85. Tilt angle Shell protection grade: IP44 2.LCD thermostat Power supply voltage: AC220V, 50/60Hz Load current: 5A Temperature sensing element:NTC Temperature measurement range: 0-99 Timing error: