Wireless Digital Floating Pool Thermometer Water Spa Gauge

Wireless Digital Floating Pool Thermometer Water Spa Gauge Description

1、With the record Maximum and minimum indoor temperature and water temperature 2、The alarm clock with snooze function 3、433 MHZ wireless receive 3 channels water temperature 4、Used for bath, swimming pool, spa pool such as water temperature measurement 5、Waterproof and floating outdoor transmitter，suitable for both indoor& outdoor swimming Pool
Features:
Applied to bath, swimming pool, spa pool such as water temperature measurement.
With the record Maximum and minimum indoor temperature and water temperature.
433 MHZ wireless receive 3 channels water temperature.
The alarm clock with snooze function.
Waterproof and floating transmitter, suitable for both indoor& outdoor swimming pool.
Specifications:
Calendar: from January 1, 2015 to December 31, 2099
Water temperature range: - 40 ~ 60 degrees
Indoor temperature range: -10 ~ 50 degrees
Range of visibility Wireless transmission line (outdoors):100 meters
Frequency: 433 MHZ
Update rate: 90 seconds on the remote control and display control bench for 10 seconds
Accuracy of measuring range resolution indoor temperature: - 40~ 140 F
Water temperature: - 58 ~140 F
Power display console: 2 x AAA 1.5 V alkaline battery (not including)
Remote sensors: 2 x AA 1.5 V alkaline battery (not including)
Instructions:
1. Receiver operating instructions:
1.1 normal mode:
* Single click "MODE/SET" key to switch for ALARM and the
current time
* Long press "MODE/SET" button to enter setting MODE
* Sheet according to the "MEM" button to check the temperature,
the largest minimum value
* Press the "MEM" button more than 2 seconds, remove all temperature, history
* Single click CH / + button switch display different RF channel data
* Long press "CH / +" button to remove the currently displayed
data channels, and into the RF receiver
* Single click "CF / -" key to switch from the C/F
* Single press the "SNOOZE" key backlight lighting for 5 seconds
1.2 Time setting mode
* Single click "MODE/SET" button to switch
the display MODE to the time pattern, switching sequence is: _:_ ring and ring
for_time
* In time mode, long press this button to enter setting
mode
* Project set will flicker at 1 HZ frequency
* Set order: hour xx minuter xx second(1-20 minutes, 5 minutes by default) exist
* Set result, single click "MODE/SET"
* Single click "CH / +" key, set value increase step, long press is more than 2 seconds, then value forward by 8m/step
* Single click "CF / -" key, set point to take a step backwards, long
press is more than 2 seconds, the set point at 8m/ steps
* When not operating buttons within 30 seconds, automatically quit setup
mode, has set value will be saved
1.3 Ring ring alarm Settings
* Single click "MODE/SET" button to switch the display MODE to
ringing alarm MODE
* Long press "MODE/SET" key to enter setup MODE
* The project is set to 1 HZ flicker frequency
* Set order: -xx hour-xx minute-xx second exist
* Set result: single click "MODE/SET"
* Single click "CH / +" key, set value increase step, long press is more than 2 seconds, then step value forward by 8m/s
* Single click "CF / -" key,set value take a step backwards,
long press is more than 2 seconds,then step value backward by 8m/s
* SET result, single click "MODE/SET"
* When not operating buttons within 30 seconds, automatically quit setup
mode, has set value will be saved
* Display AL time, press "CH / +"to NO./OFF AL
* When is ringing alarm, press the "Snooze/backlight" will delay
ringing alarm, press the other key to exit the ring
2. The transmitter operating instructions:
* "C/F" button: every press it, convert Celsius/Fahrenheit
temperature at a time
* "CH" button: every press it, convert channel at a time. There
are three channel choice.
Package Included:
1 X Wireless pool thermometer transmitter( not include battery)
1 X Wireless pool thermometer receiver
1 X User manual
Note:This product is waterproof. After setting up. Requested
the waterproof coil installed. Put the cover and tighten.