Wisniowski 433 MHz 4-channel rolling code remote for garage

Wisniowski 433 MHz 4-channel rolling code remote for garage Description

DescriptionBrand: Scimagic-RCOrigin: Mainland ChinaCertification: CEModel Number: Remote Control WISNIOWSKIFor: WISNIOWSKI Garage Door Remote ControlFrequency: 433MHZ 433.92mhzChip: Rolling CodeUsage: Program on ReceiverVoltage: 12vMaterial: Metal and PVCDistance: 10-50m open spaceSize: 70*33*12mmContains: Remote Control/Key Ring/English Manual/BatteryCompatible with WISNIOWSKI 433.92MHz Rolling Code Remote ControlDescription:1.Type of Programming: Programming with the Receiver2.Number of Channels: 43.Code: Rolling Code4. Frequency: 433.92MHz5. Working Range: 10-50 m (open space)6. Power supply: 12V 27A7. Remote control with battery Safety in use: dynamic code provides a high level of security, non-copyable code.Disclaimer: Your old remote control must be the same as the advertisement, new remote control is not compatible with other remote controls.WISNIOWSKI Remote Control Programming: Program to gate/garage door opener in the same way as original WISNIOWSKI remote controls, see your receiver's user manual. Materials required for programming: your receiver 1. Open your receiver from the garage door.2. Press the programming button. The inscription is usually: ENR, MEMO or PROG. 3. On some receivers it is necessary to hold down the programming button. 4. On the receiver, the LED indicates the start of the programming mode. 5. Press and hold a button on the new remote control for one second and release it again. 6. The receiver LED lights up differently or goes out to indicate successful programming. 7. Wait a few seconds to exit the programming mode. 8. Congratulations Your new remote control is programmed Include Remote control Battery Keychain English manual