Wisniowski 433MHz remote control 4-channel rolling code

Wisniowski 433MHz remote control 4-channel rolling code Description

DescriptionBrand : Scimagic-RCOrigin : Mainland ChinaCertification : CEModel Number : Remote Control WISNIOWSKIFor : WISNIOWSKI Garage Door Remote ControlFrequency : 433MHZ 433.92mhzChip : Rolling CodeUsage : Program on Receiver: 0Voltage Metal: 1Voltage and Receiver: 0Voltage m open areaSize: 70*33*12mmIncluding: Remote Control/Key Ring/English Manual/Battery Compatible with WISNIOWSKI 433.92MHz Rolling Code Remote ControlDescription: 1. Programming Type: Programming with Receiver2. Number of Channels: 43. Code: Rolling Code4. Frequency: 433.92MHz5. Range: 10-50m (open area)6. Power: 12V 27A7.Remote control comes with battery User security: dynamic code provides a high level of security, code that cannot be copied. Disclaimer: Your old remote control must be the same as advertised, new remote controls are not compatible with other remote controls. WISNIOWSKI Remote Programming: Program the gate/garage door opener in the same way as original WISNIOWSKI remote controls, see your receiver's user manual. Materials required for programming: your receiver 1.Open your receiver from the garage door. 2.Press the programming button. The inscription is usually: ENR, MEMO or PROG. 3.On some receivers it is necessary to hold down the programming button. 4..On the receiver, the LED light indicates the start of the programming mode. 5.Press a button on the new remote control for one second and release it again. 6. The receiver's LED light will light up differently or go out to indicate successful programming. 7. Wait a few seconds to exit the programming mode. 8. Congratulations Your new remote control is programmed Include Remote Control Battery Key Chain English Manual