2 Pack Motion Sensor Light Socket E26 E27, Smart Motion Activated Adapter with Automatic On Off Control for Garage or Closet

2 Pack Motion Sensor Light Socket E26 E27, Smart Motion Activated Adapter with Automatic On Off Control for Garage or Closet Description

Motion Activated Light Socket Overview A screwin motion sensor socket that converts any standard E26 or E27 lamp holder into automatic, motionactivated lighting. Ideal for indoor spaces where hands lighting improves convenience and safety. Key benefits Hands lighting: Automatically turns lights on when motion is detected and off after a set time, eliminating fumbling for switches in dark areas. Energy conscious: Adjustable time and ambient light sensitivity reduce unnecessary run time. Easy retrofit: Screws into existing E26 or E27 sockets for quick installation without rewiring. How it works Mount the socket vertically and install a compatible bulb pointing downward. The builtin infrared motion sensor detects movement up to about 10 feet when mounted 8 to 10 feet above the floor and responds from any direction within its unobstructed field. The unit turns the light off automatically after the selected time if no infrared motion is detected. Features and specifications Socket type: Fits E26 and E27 lamp holders. Bulb compatibility: Designed for incandescent and fluorescent bulbs less than 60 watts. Not compatible with heat lamp bulbs. Not recommended for LED garage lights greater than 60 watts. Detection range: Up to approximately 10 feet when mounted 8 to 10 feet. Detection coverage: 360degree sensing in unobstructed space. Time adjustment: 10 seconds to 5 minutes. LUX adjustment: 3 to 2000 lux, with a SUN position for daytime testing. Orientation: Must be installed in a vertical position with the sensor facing the desired detection area. Operating temperature: 20 to +40 C ( 4 to 104 F ). Installation note: Maintain more than 15 feet spacing between two sensor bulbs to avoid interference. Sensor type: Passive infrared. Does not detect through glass or other solid obstacles. Important use and installation notes Do not use with lamp shades that block the sensor. Obstructions will reduce or prevent detection. Not suitable for enclosed exterior fixtures with glass covers. Infrared detection will not work through glass or similar barriers. If the fixture is oriented horizontally, sensor responsiveness will be reduced. Install vertically for performance. Make sure the sensor faces the area you want to cover and that the room size is appropriate for the stated detection range. For daytime testing, set the LUX knob to the SUN position; otherwise the sensor may remain inactive. Recommended mounting height 8 to 10 feet. Not recommended for porch lights taller than 10 feet. Indoor applications Garage or basement: Automatic task lighting when entering storage or work areas. Walkin closet or pantry: Hands activation when accessing stored items. Stairwell or hallway: Temporary illumination for safe passage at night. Quality control All parts are tested and quality controlled prior to shipment. Installation summary 1. Turn power off at the fixture. 2. Screw the motion sensor socket into a standard E26 or E27 lamp holder. 3. Install a compatible bulb pointing downward. 4. Mount the fixture vertically, set LUX and time to desired positions, and test with LUX on SUN if testing in daylight. This motion activated light socket provides a practical, retrofit solution for automatic indoor lighting where unobstructed infrared detection and correct installation are ensured.