2X Motion Sensor Light Socket E26 E27 Adapter with 360 PIR Detection Auto On Off Control for Garage Basement

2X Motion Sensor Light Socket E26 E27 Adapter with 360 PIR Detection Auto On Off Control for Garage Basement Description

Motion Sensor Light Socket Adapter, 2 Pack Quick summary Converts any indoor E26 or E27 lamp socket into an automatic motionactivated light with no wiring needed. Screws in like a bulb; then screw your compatible bulb into the adapter and the fixture will turn on automatically when motion is detected and off after the set delay. Key benefits Hands lighting: Automatically turns lights on when you enter and off when you leave, reducing fumbling in the dark and saving energy. Easy installation: No tools or electrician required. Installs just like a bulb. Adjustable settings: Set the timeout from 10 seconds to 5 minutes and adjust the light sensitivity from 3 to 2000 lux to match your needs. Main features Detection: PIR infrared sensor offering 360degree coverage. Up to 10 feet detection range when the adapter is mounted about 8 feet above the floor. Load and compatibility: Compatible with standard E26 and E27 bulbs with a maximum load of 60 watts. Not suitable for heat lamp bulbs. Operational limits: Works indoors only. Does not detect motion through glass, lampshades, or other obstacles. Not suitable for outdoor fixtures with glass enclosures or lamp shades. Mounting orientation: Must be installed in a vertical position for sensitivity. Horizontal orientation reduces sensor performance. Environmental range: Operating temperature from 20 to 40 degrees Celsius ( 4 to 104 degrees Fahrenheit). Important usage notes and limitations Do not use on porch lights mounted higher than 10 feet; not recommended for fixtures taller than 10 feet. Sensor uses infrared detection and will not work through glass, plastic shades, or other obstructions that block line of sight. Do not install inside closet lampshades or glass enclosures, and do not use on exterior lights where a glass cover blocks the sensor. Not suitable for LED garage lights rated above 60 watts. Practical applications Hallways, stairwells, corridors and entryways where automatic on and off is convenient. Closets, pantries, laundry rooms, attics and storage rooms to avoid walking into a dark space. Basements and utility rooms where adding a wall switch is impractical. Package contents 2 motion sensor light socket adapters. Quality and support Each product is inspected before shipment. If you have questions after, please contact the seller through your channel for assistance.