(2x1L) Smartseal Premium Sealer Stripper

Smartseal's Premium Sealer Stripper is a ready to apply, Powerful, Professional formula suited for both external & internal use. This Premium Sealer Stripper Removes Solvent and Non-Solvent Acrylic Sealers from a wide range of surfaces. The Sealer Stripper is an Easy to Use, Non-Corrosive Formula suitable for Concrete, Natural Stone, Imprinted Concrete, Wood, Plastic, Stone & More.

*Not Suitable For Removing Impregnating Sealers*

Benefits:

• Ready To Use
• Powerful Formula
• Fast Acting
• Non-Corrosive
• External & Internal Use
• Removes Sealers & Paints 

Ideal for use on Driveways, Patios & Paths.

APPLICATION

Ready to use and should not be diluted. Ensure the surface is completely dry before application. Cover container lid with a cloth during opening to avoid splashes. Layer a generous, even coat onto the surface using a clean brush or airless spray (rollers can be used for light coatings) DO NOT BRUSH OUT Leave for the recommended timing dependant on the stripping guide and apply a second generous coat. Rinse clean with cold water containing detergent and a stainless steel scourer, leave to dry. Never use steel wool, stainless steel only.

Guide to Stripping Times

• Graffiti: 5 minutes - 2 Hours
• Varnish: 10 - 30 minutes
• Sealer: 15 - 90 minutes
• Paint: 5 - 30 minutes
• Two pack varnish: 15 - 90 minutes
• Heavy multi-layered paint: 45 minutes - 12 hours
• Two pack lacquer: 15 minutes - 12 Hours
• Artex: 30 minutes - 2 Hours

RECOMMENDATIONS:
Store sealed in a cool place away from direct sunlight. Once opened, use entire contents as soon as possible.
Do not apply to Damp Surfaces or at temperatures below 7°C.

APPLICATION:
Application by sprayer, roller or brush - do not allow to dry.

HEALTH & SAFETY:
Wear appropriate safety wear at all times. Technical data sheets and additional technical information is available upon request.