2×240W Flexible Solar Panels 480W Pack IP65 UK

2×240W Flexible Solar Panels 480W Pack IP65 UK Description

240W Flexible Monocrystalline Solar Panels — Twin Pack (480W Total DC)

This listing is for two flexible monocrystalline photovoltaic modules (SKU 7053A-LS-SP240X2). Each module is rated at 240 W under standard test conditions, giving 480 W total nameplate DC capacity when both panels operate at full rated output. The thin, bendable format suits balconies, vehicle roofs, marine decks and other installations where a framed glass panel is impractical.

Micro inverters, charge controllers, batteries, mounting hardware and AC power leads are not included. Only connect to equipment whose voltage, current and fuse limits match this module and your local electrical rules.

Why Choose / What You Get

• Two 240 W flexible modules — Combined nameplate 480 W DC at STC (2 × 240 W).
• Monocrystalline design — Model family FLEX240MD(BK), 182 mm mono cells in a 6×12 layout.
• Outdoor-ready enclosure — Module protection rated IP65; junction box rated ≥IP67.
• High efficiency — Module efficiency 17.55% (per datasheet).
• Integrated DC wiring — Each panel: 2 × 3000 mm leads, 2.5 mm², with plug connectors (MC4-compatible); parallel cell connection as listed in the datasheet.
• Edge mounting points — Metal eyelets for screw or tie-down fixing (fasteners not included).

Electrical Specifications (Per Module)

Standard test conditions (STC): irradiance 1000 W/m², AM1.5 spectrum, 25 °C.

• Peak power (Pmax): 240 W
• Open-circuit voltage (Voc): 23.60 V
• Short-circuit current (Isc): 11.90 A
• Maximum power voltage (Vm): 21.01 V
• Maximum power current (Im): 11.23 A
• Maximum series fuse: 20 A
• Power tolerance: ±3%
• Maximum system voltage: 600 V DC

With two modules, series connection increases string voltage; parallel connection increases current. Design the array to stay within your charge controller or micro inverter limits. Real-world output varies with sun angle, temperature, shading and wiring.

Environmental & Temperature Data

• Operating temperature: −40 °C to +85 °C
• Temperature coefficient of Voc: −0.29506%/°C
• Temperature coefficient of Isc: +0.08558%/°C
• Temperature coefficient of Pmpp: −0.38001%/°C

Mechanical & Packaging Notes

• Module dimensions (each): 1150 × 1090 × 2 mm (L × W × H)
• Typical net weight (each): approx. 2.6 kg (datasheet); marketing artwork may show approx. 2.5–3.1 kg — use shipped weight for logistics.
• Inner carton reference (per datasheet, 2 panels): 1170 × 1120 × 30 mm
• Number of bypass diodes per module: 2

Installation & Care

• Mount in full sun where possible; partial shading reduces output and may stress cells.
• Secure using the edge eyelets; do not pierce the active cell area.
• Avoid walking on the panel, sharp bending beyond the manufacturer’s limits, or striking the surface.
• Route and protect DC cables; observe polarity when paralleling or series-wiring modules.

Ideal For

• Twin-module balcony or railing PV layouts
• Camper, caravan and vehicle roof upgrades
• Boats and coastal leisure craft
• Outbuildings, sheds and auxiliary rooftop solar
• DIY builds with a suitably rated MPPT controller or grid-tie micro inverter

Colour

Black finish (full-black flexible module appearance).

Package Contents

2 × 240 W flexible monocrystalline solar modules with integrated DC leads and connectors; documentation as supplied in the carton.