6-in-1 Wood Turning Chisel For Lathe Full Size Replacement Tips

6-in-1 Wood Turning Chisel For Lathe Full Size Replacement Tips Description

Application

This product can be used for fast-processing wooden workpieces on lathes. The different types of tools are applicable as follows：

1. The square carbide blade is suitable for smooth surfaces, especially for well-working pencils, is suitable for roughing and can be used to cut the outer radius of the housing and twist the bead during the spindle rotation.

2. The large round carbide blade is ideal for concave surfaces and is suitable for small to medium-sized projects. It is the first choice after the cylindrical pile design, for example, pens, Christmas decorations, bottle caps, handles, and bowls.

3. The diamond carbide blade is suitable for clear lines. It is perfect for corner details, spinning beads, blankets, boxes, and other finishing details in spinners and bowls.

4. The small round carbide blade is specifically designed to convey material into hollow containers that tools cannot reach it.

Specification

Material: Alloy Aluminum Oxide, Hard Alloy, Stainless Steel

Square Carbide Blade Size: 11 * 11mm/ 0.43 * 0.43in

Diamond Carbide Blade Size: 10 * 30mm/ 0.39 * 1.18in

Round Carbide Blade Size (Large): Φ 12 * 2.5mm/ Φ 0.47 * 0.1in

Round Carbide Blade Size (Small): Φ 8.9 * 1.85mm/ Φ 0.35 * 0.07in

Length of Tool Shaft (Diamond Cutter Head): 50cm/ 19.69in

Length of Tool Shaft (Large Round Head): 24.5cm/ 9.65in

Tool Shaft Size(Small Round Head): 23.5 * 2cm/ 9.25 * 0.79in

Handle Size: 28 * 2.6cm/ 11.02 * 1.02in

Gross Weight: 2.2kg/4.8lbs

Net Weight: 2kg/ 4.41 lbs

Package Size:  38.00 * 16.50 * 8.00cm/15 * 6.5 * 3.14in

Package Included

1 * Wood Lathe Turning Tools Set

1 * Aluminum Suitcase

Notes

Please allow the slight color difference caused by the shooting light and the 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.

Key Features

High-quality Material: The tool adopts stainless steel spindle, aluminum alloy handle, and hard alloy cutter head, which can improve strength and corrosion resistance and extend the tool's life.

Time-Saving:When the blade becomes blunt, you can easily replace it, saving you a lot of time grinding.

Easy to Use: Variable length shaft design is valuable for woodworking at all skill levels. By reducing the learning curve related to traditional turning tools, cemented carbide tools enable beginners and experienced turners to quickly start projects.

Ergonomic Design: The tool is designed with a slender frosted handle, which is comfortable to hold. And the aluminum alloy handle has grip, comfort, and durability.

Sharp and Precise: The product adopts a hard alloy cutter head, which is more durable and sharp. The cutter head is fine and small, suitable for all kinds of precision processing to meet your requirements.   

Easy to Store and Carry: The product is equipped with an aluminum tool box, all parts are placed in corresponding positions to avoid storage wear and convenient to carry.

High Safety: The tool is equipped with an extension rod, and you can adjust the length of the tool rod as needed. We also provide an allen key for loosening or tightening screws. You can use the tool deeper without any safety problems.

Details

Stainless Steel Spindle: The square axis profile helps keep the tool on the tool holder and level with the ground, making it less likely to roll and move than the circular axis tool.

Rotatable Cutting Edge: The cutting edge has several rotatable sides. When the tool becomes blunt, you just need to rotate the tip to get a fresh and clean cutting edge.