BONDIT 5 MINUTE PU WOOD GEL - TRANSLUCENT, 300ml

Bond It PU RAPID WOOD GEL can be used in joinery and carpentry, for bonding garden furniture, staircases, boats, wooden constructions, sandwich panels and insulation materials. It has excellent adhesion to wood, chipboard, laminate, metals, polyurethane, expanded and extruded polystyrene foams, mineral wool, concrete, stone, bricks, gypsum boards and all traditional porous substrates. It is also an ideal adhesive for fixing carpet grippers and stair nosing's. This product is seawater proof and is resistant to acid and chemicals. 

Ensure all surfaces are clean, dry and free from grease, oil or any other contaminants that may hinder adhesion. The substrate must also have a maximum humidity of 30%RH. 

WEAR GLOVES. Carefully cut the tip of the cartridge taking care not to damage the threaded area. Screw on the nozzle supplied and cut to an angle of 45°. Apply using a standard sealant gun to one of the substrates, or to both if the materials are porous. Assemble immediately (within 5 minutes) and clamp for at least 1 hour. Pressing the materials during curing is necessary to reach the highest possible end strength. The product will foam slightly on application to fill any small gaps. Clean away any residue immediately with a dilute cleaning solution, do not allow to set.

• Bond It PU RAPID WOOD GEL will begin to skin after approximately 5 minutes. 
• Fast set will be achieved after approximately 10 minutes with final bond strength after 12 hours. 

• Coverage 150-250g per m2 . 
• Container Size 300ml plastic cartridge. 
• Colour Translucent gel. 
• Shelf Life 12 months from date of manufacture, when stored in original, unopened cartridges. 
• Storage Conditions Store in cool, dry and well ventilated conditions between +5 to +25o C.