Clear self adhesive silicone draught excluder weather proofing seal window door

Clear self adhesive silicone draught excluder weather proofing seal window door Description

‘Premium Product’ super flexible and compressive, superior seal and far longer long lasting performance then the foam or epdm rubber seals.

Description

• Self adhesive high-performance silicon strip
• Suitable for gaps of 2 to 7 mm
• 6 m roll, enough for one door or one window
• Four year manufacturers guarante
• Excellent alternative to white/brown/black coloured window or door seals as this product is transparent and not readily as visible.

Why Draught Proof?

Your house or commercial property will lose heat during cold weather partly due to poor thermal insulation, but also due to the air-leakiness of the building.

This warm air loss is technically known as infiltration or permeability and is measured in metres cubed per hour per square metre of floor area.

A typical building built 1900 to 1990 will loose around 20-30 metres cubed of air per hour per square meter of floor area. This is due to natural leakage through the fabric of the building, but largely through gaps around windows and doors. Good use of draft proofing could reduce your air permeability to around 8-10 metres cubed per hour which is a good low cost way of reducing your heating bills. The amount of air infiltration to your property will also depend on its exposure to wind so if you are on a hillside or near the coast then it is even more beneficial for you have good draught proofing.