Internal Under Door Bottom Twin Tube Draft Draught Excluder Energy Saving 950mm

Internal Under Door Bottom Twin Tube Draft Draught Excluder Energy Saving 950mm Description

Why Draught Proof?

Your house or commercial property will lose heat during cold weather partly due to poor thermal insulation, but also due to the air-leakiness of the building. This warm air loss is technically known as infiltration or permeability and is measured in metres cubed per hour per square metre of floor area. A typical building built 1900 to 1990 will lose around 20-30 metres cubed of air per hour per square meter of floor area. This is due to natural leakage through the fabric of the building, but largely through gaps around windows and doors. Good use of draught proofing could reduce your air permeability to around 8-10 metres cubed per hour which is a good low cost way of reducing you heating bills. The amount of air infiltration to your property will also depend on its exposure to wind so if you are on a hillside or near the coast then it is even more beneficial for you have good draught proofing.

• Suitable for internal doors only
• Helps you to save energy by keeping one room in your house warmer than other rooms
• Stops draughts coming under the door
• Slides under the door - easy to fit
• Can be held in place with Velcro if required - supplied with Velcro
• Can be cut to size with scissors
• Easy to remove for the summer and replace in winter