D-Link DAP-X2850 wireless access point 3600 Mbit/s White Power over Ethernet (PoE)

D-Link DAP-X2850 wireless access point 3600 Mbit/s White Power over Ethernet (PoE) Description

The Wi-Fi 6 ready DAP-X2850 is on hand to provide unbeatable speeds, greatly increased capacity and interference-free coverage throughout businesses, paired with the easy management of Connect. Wi-Fi 6 Ready Next-gen connectivity with up to 4x more capacity. Improved Device Capacity Improved Device Capacity More simultaneous users, with better Wi-Fi quality for everyone. Target Wait Time, green, improving battery life Perfect for IoT Target Wait Time (TWT) reduces power consumption, improving battery life of Wi-Fi 6 and IoT devices. Gigabit Uplinks 2.5 Gigabit Uplink Multi-Gig uplink eliminates bottlenecks at the AP. PoE Capable PoE Ready A tidy, power cable free setup. WPA3 WPA3 Supports the latest Wi-Fi security for more protection. Hails The End of Slow Business The DAP-X2850 is empowered with next generation Wi-Fi 6. Enhanced MU-MIMO with even more uplink and downlink streams serves more devices simultaneously. OFDMA dramatically increases transmission efficiency and 1024-QAM packs even more data, bringing unadulterated speed increases of a searing 25%. Wi-Fi 6 leverages all these features and more to create Wi-Fi with unparalleled performance. Wi-Fi That Turbo Boosts Business Performance With the DAP-X2850 by your side, it's all systems go. It is fully prepared to handle all day-to-day demands of busy SMBs. Equipped with Wi-Fi 6, there are massive performance improvements, as well as all the features of 11ac now available for the 2.4 GHz band too. Take a Load Off and Let Your AP do the Hard Work The DAP-X2850's Load Balancing feature spreads the work load between two or more Access Points to get optimal resource utilization, throughput and response time, while Airtime Fairness helps distribute equal amounts of air time to each connected client. Band Steering auto-connects devices such as smart phones and tablets to the higher-capacity 5 GHz band while allowing devices 2.4 GHz-ready to remain. The result is a steady, consistent connection for each user - the perfect balancing act. No-Wait Wi-Fi Even at Peak Time with MU-MIMO Equipped with the latest 802.11ax MU-MIMO technology and 3600 Mbps throughput, delivering exceptional connectivity to more users and devices just got a lot easier. Your network will not balk, even at the busiest of times. Your Network, Future Proofed Equipped with a 2.5 Gigabit Ethernet Port, the DAP-X2850 delivers exceptional multi-gigabit performance to support demand for better and faster Wi-Fi. Compatibility with standard 802.3at PoE+ is ideal for flexible deployment. No need to run extra power lines, no added hassle when configuring your hardwiring and no more cable clutter. Perfect for advanced installations in areas where power outlets are not readily available. Multi-Mode Makes the Most of your Network Capabilities In order to achieve optimal network performance, the DAP-X2850 has several operational modes tailored to best fit the individual needs of your network. Access Point, Wireless Client, WDS (Wireless Distribution System), and WDS with Access Point modes allow for flexible, customizable deployment whatever your requirements. Free Nuclias Connect Remote Centralized Management Software D-Link's Nuclias Connect is a centralized management and analytics solution that brings convenience, control, customizability and cost-effective scaling to SMB (small-medium-sized business) networks. It enables network monitoring, management, and device configuration through a single, easy-to-use software interface. What's more - it's free to download and there are no licensing or support fees. Easily manage your network, anytime, anywhere. Complete Control over your Network's Access Complete control comes as standard with the DAP-X2850. Combined with the Nuclias Connect Software, a variety of the latest in network security and management tools are at your fingertips. You can rest assured that the best of the best are hard at work keeping your network protected and hitch free. Supports WPA3 The latest WiFi security for more protection. RADIUS Eliminate shared passwords with unique credentials for each employee Customizable Captive Portal Separate guest and employee access. The Beating Heart of Your Network At the heart of your network is the DNH-100 Wireless Controller, or 'The Hub'. It centralizes all aspects of your Access Points' provisioning and management, allowing them to work together as a team. Features such as self-organizing, self-optimizing and self-healing keep the network performing at its peak. * Easy to manage with D-Link's free software-based management solution, Nuclias Connect * Wi-Fi 6 ready: delivers greater network efficiency and lower latency, with nearly four times the capacity of previous Wi-Fi standards * MU-MIMO slices through congestion, reducing wait time for all users * Superior throughput with dual-band Wi-Fi offers high transfer speeds * Coverage is shared more efficiently over more users with Airtime Fairness * Band Steering intelligently manages users, pushing them onto the higher radio frequency when possible * Two LAN ports (2.5 Gbps and 1 Gbps) offer expansive backhaul up to wired network, eliminating bottlenecks at the AP * Support for Power of Ethernet 802.3at means less wires, for cleaner and easier deployment * Stay secure with the latest WPA3 Personal & Enterprise wireless encryption D-Link DAP-X2850. Maximum data transfer rate: 3600 Mbit/s, Maximum data transfer rate (2.4 GHz): 1147 Mbit/s, Maximum data transfer rate (5 GHz): 2402 Mbit/s. Security algorithms: 64-bit WEP,128-bit..., Service Set Identifier (SSID) features: SSID broadcast, SSID broadcast on/off. Management protocols: SNMP (v1, v2c, v3), Telnet, SSH, SSL. Output voltage: 12 V, Output current: 2.5 A, Power consumption (max): 19.44 W. Placement: Ceiling, Wall, Product colour: White, Housing material: Plastic