Extra Strength Liquid Mortar Plasticiser Cement Admixture 25L Brown

Description
A premium quality plasticiser designed to improve the workability of all portland cement based

mortars and to increase their resistance to freeze­thaw cycles. Conforms to EN 934­3.

Bond It LIQUID MORTAR PLASTICISER
eliminates the need for additional lime to be
added to the mix. Entrains air increasing
workability and frost resistance.

Gauging water requirements are reduced minimising
the risk of cracking or crazing because of shrinkage
while drying.

Uses:
For addition to brick mortars, cement renders,
pointing mixes. Replacing lime in the above mixes.

Application
Shake well before use. Use at the rate of 100ml to
150ml per 25Kg bag of cement.

For hand mixing best results are obtained by adding
the MORTAR PLASTICISER to the gauging water
before mixing. In the case of mechanical mixes the
MORTAR PLASTICISER may be added directly to the
cement mixer.

Do not use at temperatures below +2oC or
when temperature is expected to drop below0oC within 24 hours.

Storage Conditions
Store in cool dry conditions, protect from frost and
high temperatures.

Shelf Life
Up to 24 months when stored according to
manufacturers instructions.

Disposal of Containers
Do not leave empty containers where residue could
be harmful to children, animals or the environment.
Replace lids and remove any containers to a central
disposal point in accordance with local regulations.


Safe Handling Precautions
Please refer to separate material safety data sheet
for full handling, use and storage instructions. Keep
out of reach of children. It is the users responsibility
to determine suitability for use. If in doubt contact
our Technical Department for advice.

Note: this information is for general guidance only, since site
conditions and labour are beyond our control. It is
recommended that users make their own tests to determine
suitability

Specification Summary
Flammability Non Flammable
Boiling Point 100oC
Solubility Totally soluble
Composition Blend of synthetic surfactants
Specification Type EN934­3

Container Sizes
Code: BDH016
Size: 25L
Colour: Brown
Barcode: 5060021364739

Package Content
Bond It 25L Extra Strength Liquid Mortar Plasticiser Cement Admixture Brown

•  1. Any Confuse Or Dissatisfied About Our Products Please Contact Us. Please Do Not Leave Casual Neutral/Negative Feedback.
•  2. Free Postage To UK Mainland, Postage To Any Other Islands & Northern Islands Charges Apply
•  3. Please allow 1-3mm error due to manual measurement.
•  4. Due to the light and screen setting difference, the item's color may be slightly different from the pictures
•  5. We will carefully test every item before shipment. The quality is guaranteed!