HG Colour Intensifier For Granite and Natural Stone Types

HG Colour Intensifier For Granite and Natural Stone Types Description

HG Colour Intensifier For Granite and Natural Stone Types

• HG specializes in high quality cleaning, protection and beautification products for in and around the home
• The HG range offers a solution for every cleaning problem around the home.
• A professional product which re-enhances the colour of your freestone and brings it back to life
• It will not make the surface slippery nor harm the natural breathing process of the stone.

Directions for Use: 1.Thoroughly clean the surface, preferably with HG Super Remover, so that the surface is entirely clean, free of dust, grease, wax and polish. Remove any cement or mortar residues with HG Cement Grout Film Remover (HG Extra) or HG Cement, Mortar and Efflourescence Remover (HG Limex). For marble, Belgian blue stone and other natural stones containing lime use HG Marble Cement and Lime Film Remover. 2. Allow surface to dry for 3 days after doing this. For floors with switched on under-floor heating allow 24 hours to dry. Switch off under-floor heating 12 hours prior to treatment. 3. Apply HG Colour Intensifier in a THIN even layer with a clean Non-Fluffy Cloth using a circular motion. For larger areas apply in a THIN even layer with a Mohair Paint Roller and then rub in with a clean Non-Fluffy Cloth or with a low speed polishing machine with a lambskin cover. 5. After a maximum of 5-10 minutes the HG Colour Intensifier will have been absorbed into the surface, after this the excess product must be removed extremely thoroughly with a dry cloth (perhaps with the aid of some turpentine). 6. Treatment of very porous surfaces will have to be repeated, until the surface no longer absorbs any HG Colour Intensifier (maximum colour intensity has been reached). 7. If a gloss finish is required then the surface should be buffed (polished) after 30-40 minutes with a clean, dry Non-Fluffy Cloth or with a polishing machine with a white non-woven pad, or with a parquet polisher fitted with felt pads. 8. The treated surface can be used / walked on after 4 hours and can be fully utilised after 3 days.