Millimeter-Wave Micro-Motion Sensing Module, 60GHz Pulse Coherent (PCR) Technology, Distance Measurement.

Millimeter-Wave Micro-Motion Sensing Module, 60GHz Pulse Coherent (PCR) Technology, Distance Measurement. Description

This -board is designed for the Raspberry Pi Compute Module 5 Lite/eMMC series modules. It features an onboard CM5 slot, a Gigabit Ethernet RJ45 port, a 40-pin GPIO header, a 16-pin PCIe port, two USB 3.2 Gen1 Type-A , two USB 2.0 connected via 6-pin 1mm FFC connectors, two 4-channel MIPI , two , an RTC port, and more.
When the device is powered , do not plug or unplug any devices other than the USB and . To use PoE power, connect the PoE jumper to the EN position.
An onboard BOOT button allows you to enter flashing mode by pressing the BOOT button before powering and connecting the device to a computer via the Type-C port.
The Type-C port can be used as a USB slave port for firmware flashing. Do not connect any other devices while flashing firmware using the Type-C port. Insufficient power supply during flashing may cause the device to fail to be recognized. The board has two USB 3.2 Gen1 by default, with a total maximum output power of 2A.
It supports simultaneous display of different content four screens. A new MIPI driver has been added; the system will connect by default regardless of whether a screen is connected, and the screen will be displayed in split-screen mode (depending the system version).
Color: White
Material: plastic

Package Contents:
1 * sensing module