New Oase BiOrb Air Replacement Automatic Misting Unit - Part 72721 (2019+)

New Oase BiOrb Air Replacement Automatic Misting Unit - Part 72721 (2019+) Description

Oase biOrb Replacement Automatic Misting Unit - New model for 2019+ units

The biOrbAir Terrarium features a built in microprocessor and humidity sensor which controls the humidity by activating the ultrasonic automatic mister in the top reservoir as required.

The water level in the reservoir is detected by a sensor on the ultrasonic mister, when this drops below minimum level a signal is sent to the microprocessor which activates the low water level indicator. The sensor uses electrolytes in the water as a way to detect the water, helped by the use of biOrb HumidiMist in the unit. When the sensors detect this, it automatically triggers the misting system inside of the Terrarium.

The acrylic unit is easy to replace as it slots neatly into the top of the biOrb Air Terrarium.

NOTE - this is a newer unit and will only fit BiOrb Airs 2019+. Please check the underside of the misting unit you are replacing. This unit has a clear circle piece on the underside that clearly shows a green board. The older styles do not have a visible green board - for these please contact us for guidance.

Specifications

1 x Acrylic Misting Unit

Part No: 72721

Note: these will only fit the 2019+ models of Biorb Air To check which part you require please check your instructions. This unit has a clear circle on the underside that shows a green board, the older units do not have this feature.