Performance Coilovers For BMW E36 3 Series 1990-1998 Saloon Coupe Touring Spring

Performance Coilovers For BMW E36 3 Series 1990-1998 Saloon Coupe Touring Spring Description

maXpeedingrods T7 coil-overs are designed for daily street use and Junior track use. It features racing damping oil, an upgraded racing spring, height adjustable, and an adjustable camber plate( applicable for some vehicles), which offers you a lowered stance and enhanced handling.

Application

For BMW 3 E36 Saloon 09/1990-12/1998

316i 318i 320i 323i 325i 328i 318is 325is 318tds 325tds 325td M3

For BMW 3 E36 Coupe 09/1991-04/1999

318is 316i 320i 323i 323is 325i 328i 328is M3

For BMW 3 Convertible E36 03/1993-04/1999

318i 320i 323i 325i 328i M3

For BMW 3 Touring E36 Estate 08/1994-12/1999

316i 318i 320i 323i 328i 318tds 325tds

Specifications

Adjustable height: lowering 25-75mm (depending on vehicle models)

Damping: 24 levels rebound damping adjustable

Front top mounts: pillow ball bearing camber plate

Rear top mounts: pillow ball 

Spring rate Front: 9kg/mm (504 lbs/in)

Spring rate Rear: 11kg/mm (616 lbs/in)

Spring length Front:180mm

Spring length Rear: 183mm

Front spring inner diameter: 70.5mm

Rear spring inner diameter: 63-101-66mm

Shock type: Twin tube

Spring Preload: 7-10 mm

Package included

2x front coil-overs
2x rear coil-overs
2x C spanners
2x Allen wrench
1x sticker

Feature

1)Professional racing technology for junior track use and daily street use, providing better performance and enhanced handling.
2)Lowered height adjustment from 25-75mm(depending on vehicle models) which adds a more aggressive stance and a lower center of gravity.
3)Adjustable pre-load spring tension reduces shaking motion.
4)A 24-level adjustable damper allows you to dial in your coil-overs system perfectly.
5)CNC machined aluminum top mounts and lockers have excellent strength and save weight.
6)Highly durable and reliable heavy-duty steel lower mounts.
7)All inserts come with fitted long rubber boots to protect the damper and be durable.
8) Twin-tube structure provides excellent handling & control characteristics for most driving conditions.
9)Corrosion finish anodized aluminum and powder-coated carbon steel parts with a matt-finished surface.
10)Every part was tested on our professional machine before being assembled and tested by our professional racers on the road.
11)Clean room assembled maintains a higher level of accuracy and reliability.

Note:

1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen. 
3. Impact wrench is prohibited during the installation, it will loosen or damage the product.
4. Examine the clearance between tires and suspension. ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)
5. We suggest regular maintenance for the coil-over, spray with some WD40 every 3-4 months will keep it smooth and clean, which helps to extend the lifetime.