Ultracrete M90 All Purpose Fast Set Mortar Bedding Ironwork 25kg

Ultracrete M90 All Purpose Fast Set Mortar Bedding Ironwork 25kg Description

UltraCrete M90

All Purpose Fast Set Mortar 25kg

• Suitable for use on all ironwork conforming to BS EN 124
• Just add water
• Initial set time: 20 minutes, depending on temperature
• Open to traffic: 90 minutes, depending on temperature
• Can accommodate depths of 10mm - 75mm in one pass, with greater depths possible using the layer-upon-layer method
• Yield: approx. 12.5 litres per 25kg bag
• Pack size: 25kg
• Colour: Light Grey

Product Description

Ultracrete M90 All Purpose Fast Set Mortar is suitable for use on all ironwork conforming to BS EN 124.

M90 is supplied pre-blended in 25kg bags, requires only the addition of clean water and achieves exceptional bond strength, without the use of a primer. The product can be used from 10mm - 75mm in one pass, with greater depths possible using the layer-upon-layer method.

Technical Data

• Workability Time: 5 - 10 minutes (depending on temperature)
• Set Time: 20 minutes (depending on temperature)
• Open To Traffic: 90 minutes (depending on temperature)
• Yield: approx. 12.5 litres per 25kg bag
• Colour: Light Grey

Surface Preparation

Surfaces should be free from any contamination of oil, grease, paint, etc. Remove all loose particles and work on a sound substrate. Pre-soak the area with clean water prior to application to aid bond. Remove ponded water before applying the product.

Mixing

M90 can be mixed with a forced action mixer, or by hand with an appropriate tool. If hand mixing is used, ensure it is vigorous. A 25kg bag will require approx. 3.0 litres of water. A stiff consistent mix with no slumps should be achieved. Mix only enough material to apply within 4 minutes. Never re-mix or add extra water.

Safety

• Please ensure that appropriate PPE is used at all times
• Ensure adequate ventilation
• Wear protective eye goggles and gloves
• Keep product away from children and animals