US PRO Tools VAG Timing Set For 1.8 / 2.0 FSI TFSI Engines 7146

US PRO Tools VAG Timing Set For 1.8 / 2.0 FSI TFSI Engines 7146 Description

The VAG Timing Set for 1.8 / 2.0 FSI TFSI engines is a comprehensive tool kit designed specifically for VAG engines with engine codes

BYT, BZB, CABA, CABB, CABD, CADA, CAEB, CAWA, CAWB, CBFA, CCTA, CCZA, CCZB, CCZC, CCZD, CDAA, CDAB, CDHB,

CDNB, CDNC, CDND, CESA, CETA, CFK, CFPA, CGYA, CHHA, CHHB, CJBA, CJEB, CJKA, CJKB, CJSA, CJSB, CNCD, CPLA, and CPSA.

This timing set includes a range of essential tools required for various tasks related to timing belt replacement, engine maintenance, and repair. The contents of the set are as follows:

1. Crankshaft pulley holding tool (OEM T10355): This tool is used to immobilize the crankshaft pulley during removal or installation of the crankshaft bolt.

2. Crankshaft seal tool (OEM T10368): This tool is specifically designed for installing or replacing the crankshaft seal accurately.

3. Crankshaft seal tool (OEM T10354): Similar to the previous tool, this one assists in the proper installation or replacement of the crankshaft seal.

4. Camshaft locking pins (4x) (OEM T40196): These locking pins are utilized to immobilize the camshafts in their correct position when performing timing belt adjustments or replacements.

5. Chain tensioner locking clamp (2x) (OEM T40267): These clamps are employed to secure the chain tensioners in a fixed position during the timing chain maintenance procedure.

6. Chain wheel locking tool (2x) (OEM T40271, T20208): These locking tools are crucial for immobilizing the chain wheels to prevent any unwanted movement during the timing chain replacement or adjustment.

7. Camshaft control valve tool (OEM T10352): This tool aids in the installation or removal of the camshaft control valves.

8. Camshaft control valve tool (OEM T10352/1): Similar to the previous tool, this one is used specifically for the camshaft control valves.

9. Camshaft control valve tool (OEM T10352/2): This tool is designed for the installation or removal of camshaft control valves.

10. Locking pin (OEM T10060A): This pin is used to secure the camshaft in its correct position during various maintenance tasks.

11. Locking pin (2x) (OEM T40011): These pins assist in immobilizing components like the timing chain tensioner and camshaft adjuster.

12. Locking pin for oil pump (OEM T40265): This pin is utilized to immobilize the oil pump during repairs or replacements.

The VAG Timing Set for 1.8 / 2.0 FSI TFSI engines provides the necessary tools to ensure precise and accurate timing belt adjustments, camshaft installations, and other engine maintenance procedures for VAG engines with the specified engine codes.