Victron Energy Phoenix Inverter 12/800 230V

Victron Energy Phoenix Inverter 12/800 230V Description

VE.Direct communication port
The VE.Direct port can be connected to:
A computer (VE.Direct to USB interface cable needed)
Apple and Android smartphones, tablets, MacBook's and other devices
(VE.Direct Bluetooth Smart dongle needed)

Fully configurable:
Low battery voltage alarm trip and reset levels
Low battery voltage cut-off and restart levels
Dynamic cut-off: load dependent cut-off level
Output voltage 210 – 245V
Frequency 50 Hz or 60 Hz
ECO mode on/off and ECO mode sense level

Monitoring:
In- and output voltage, % load and alarms

Proven reliability

• The full bridge plus toroidal transformer topology has proven its reliability over many years.
• The inverters are short circuit proof and protected against overheating, whether due to overload or
  high ambient temperature.

High start-up power

• Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.

ECO mode

• When in ECO mode, the inverter will switch to standby when the load decreases below a preset
  value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable,
  default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on

Remote on/off

• A remote on/off switch can be connected to a two pole connector, or between battery plus and the
  left hand contact of the two pole connector.

To transfer the load to another AC source: the automatic transfer switch

• For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features
  a very short switchover time (less than 20 milliseconds) so that computers and other electronic
  equipment will continue to operate without disruption.

DC connection with screw terminal

• No special tools needed for installation

Technical Specification

• 12 Volt
• Cont. power at 25°C (1) 800VA
• Cont. power at 25°C / 40°C 650 / 560W
• Peak power 1500W
• Output AC voltage / frequency (adjustable) 230VAC or 120VAC +/- 3% 50Hz or 60Hz +/- 0,1%
• Input voltage range 9,2 – 17v
• DC low shut down (adjustable) 9,3v
• Dynamic (load dependent) DC low shut down (fully configurable)
• DC low restart and alarm (adjustable) 10,9v
• Battery charged detect (adjustable) 14,0v
• Max. efficiency 90%
• Zero-load power 6,5W
• Default zero-load power in ECO mode
• (default retry interval: 2,5 s, adjustable) 1
• ECO mode stop and start power setting Adjustable
• Protection (2) a – f
• Operating temperature range -40 to +65°C (fan assisted cooling) Derate 1,25% per °C above 40°C
• Humidity (non-condensing) max 95%

ENCLOSURE

• Material & Colour Steel chassis and plastic cover (blue Ral 5012)
• Battery-connection Screw terminals
• Maximum cable cross-section 25 10mm² /AWG4
• Standard AC outlets UK (BS 1363)
• Protection category IP 21
• Weight 5.5kg
• Dimensions (hxwxd, mm) 105 x 230 x 325

ACCESSORIES

• Remote on-off Yes
• Automatic transfer switch Filax

STANDARDS

• Safety EN-IEC 60335-1 / EN-IEC 62109-1
• EMC EN 55014-1 / EN 55014-2 / IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000-6-3
• Automotive Directive ECE R10-4

1) Nonlinear load, crest factor 3:1
2) Protection key:
a) output short circuit
b) overload
c) battery voltage too high
d) battery voltage too low
e) temperature too high
f) DC ripple too high

CE Certificates

Data Sheet

Manual