Zigbee Smart Switch Temperature Humidity Sensor 7-32V

Zigbee Smart Switch Temperature Humidity Sensor 7-32V Description

The Switch is a ZigBee-enabled inching/self-lock temperature smart switch to remotely and automatically turn on/off any appliances by phone Tuya / Smart-life APP. The switch is to use in you home that is promised by the fire-proof and flame-retardant shell.
Sync Status: Real-time device status provided to App.
Real-time monitor: Monitor real-time temperature.
Remote ON/OFF: Turn electrical devices on/off from anywhere
Share Control: Control your smart home together with your family.

Timing: Supports 8 enabled countdown/single/repeat timing tasks to turn on/off at specified time.
Auto Mode: Set Auto mode to turn on/off at a specified temp. range.
Manual Mode: Set manual mode to turn on/off immediately.
Trigger Smart Scene: The temp. value works as smart scene trigger conditions to trigger on/off other TUYA devices.
Voice Control: Compatible with for "" , for Home, for Nest.
NOTE: Must be used in conjunction with Zigbee gateway.You need to have a Zigbee gateway.Try to be close to the Zigbee gateway when pairing. (Zigbee gateway NOT included).
Input voltage: A:DC/AC 7-32V, Micro-USB 5V input.
Output: Signal output only, no voltage output.
Input current: Max 10A
Wireless Standard: Zigbee
Control mode: Mobile APP Tuya / Smart Life
Platform: for Android, for iOS
Gang: 1
Two working modes:
1. Self-locking: each channel can be turned on/off individually, and all channels can be turned on/off at the same time.
2. Inching mode: open a channel, the channel automatically close after 1 seconds.
If you need to change the mode, you need to the mode button
Note: It does not support Interlocking mode.
Color: Yellow & Black
Material: plastic

Package Contents:
1 x Zigbee Smart Switch Module

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.