10A 3.7V/7.4V/11.1V Solar Light Circuit Board Warning Flashing Solar Lamp Controller Module 3.2V‑18V

10A 3.7V/7.4V/11.1V Solar Light Circuit Board Warning Flashing Solar Lamp Controller Module 3.2V‑18V Description

10A 3.7V/7.4V/11.1V Solar Light Circuit Board Warning Flashing Solar Lamp Controller Module 3.2V‑18V
Item Type: Solar Light Control Module
Weight: Approx. 13g / 0.5oz
Material: PCB
High Power Charging Current: 10A
High Power Discharge Current: 10A
Power Supply: Support Solar/Non-Solar
Lighting Style: 4 Kinds of Flashing, Constant Light, Burst Flashing, and Counter Flashing
Battery Specifications: It can be used with lithium iron, lithium lead acid and other batteries.
MOS Tube Anti Backflow Function: Support
Power Consumption: Low
Product Size: Approx. 45x30mm / 1.8x1.2in
Applicable Situations: It can be used as solar landscape lights, solar warning lights, solar street lights, solar flashing lights, solar street signs, solar guide signs and solar monitoring systems, etc, you can use an adapter to replace the battery, and it can also be used in non-solar power supply situations.
How e:
Control Method: light control (after it is connected to the solar panel, the light is not on during the day, and it will automatically turn on in the dark)
Lighting Mode Setting Method:
S 2 and S 3 on the circuit board are the setting points for the lighting style. The circuit board has 4 brightness styles, which are flashing, constant flashing, strobe flashing and counter flashing.
The specific setting method is as follows:
1. Blinking: S 2 and S 3 open circuit are blinking, and the default is open circuit state, that is to say, the default is blinking, which blinks about 60 times a minute (blinking for 100 milliseconds and 900 milliseconds).
2. Constant light: S 2 short circuit, S 3 open circuit is always light, this mode can be used when continuous power supply is required.
3. Strobe flash: S 2 open circuit and S 3 short circuit are flash mode.
4. Pair flashing: S 2 short circuit, S 3 short circuit flashing mode, flashing about 60 times a minute (flashing for 500 milliseconds, pause for 500 seconds).
Light Control and Non Light Control Settings:
1. S 1 open circuit on the circuit board is in the light control state, that is, it is charged during the day and lights up automatically at night. By default, S 1 is in the open state.
2. After S 1 on the circuit board is short circuited, it is in a non light controlled state, that is, it is charged during the day and lights up during the day and night.