9999 Count Multimeter with NCV, Auto-Ranging LCD Handheld Tester for Voltage, Current, Resistance - Compatible with Universal

9999 Count Multimeter with NCV, Auto-Ranging LCD Handheld Tester for Voltage, Current, Resistance - Compatible with Universal Description

ANENG SZ02 Smart Digital Multimeter Auto Range 9999 Counts NCV Universal Meter Handheld Multifunctional Tester Voltmeter Ammeter with Backlight Flashlight AC/DC Voltage & Current Resistance Capacitance Frequency Temperature Measurement two torch at for auxiliary working area in low lit or dark environment, not afraid of dark when working, and it will automatically turned off after about 5 minutes. built-in overload conservation fuse, smart -burn. Meet /AC 600V CAT III overvoltage standard, and double insulation conservation(class II). place NCV sensor closer to measured cable, and multimeter can detect whether voltage is greater than 90V AC voltage. When AC voltage being detected, meter buzzer alarms and LCD analog bar displays induction intensity. as small as a mobile phone, convenient to use and carry around. Built-in with high performance chip to ensure its accuracy. soft push buttons is easy to operate, large LCD display screen with bright backlight, convenient to check measured data at a glance even in dark environment. protected with a soft silicone cover, you can use meter at various condition without worrying it from falling down or scratch by hardware. it can measure AC/ current, AC/ voltage, resistance, capacitance, temperature, frequency, continuity and diode test, fire wire detection, etc. Color: Orange / Red (Optional) Material: ABS Display: LCD Max. Display: 9999 digits : Auto Sampling Time: About 3 times/second Auto-off: 15 minutes Working Altitude: Max. 2000m Operating Temperature: 0~40 Storage Temperature: -10~50 Supply: 2 * 1.5V AAA battery (NOT included) Item Size: 127 * 67 * 29.2mm / 5.00 * 2.64 * 1.15in Item Weight: 131g / 4.62oz Package Weight: 242g / 8.54oz Package Size: 13.5 * 7.5 * 6.6cm / 5.31 * 2.95 * 2.60in Specifications: Resistance: 0~99.99M Current: 20mA~10A NCV Induction: Yes Data Hold: Yes Diode: Yes AC Current: 20mA~10A AC Voltage: 600mV-999.9V Hz: 0~1000Hz Buzzer: Yes Capacitance: 0nF~99.99mF Voltage: 600mV-999.9V /Fire Wire: Yes Temperature: -40~1000 (-40~1832) Package List: 1 * Manual (English) 1 * Multimeter 1 * Pair of Test 1 * Thermocouple Large LCD Screen & Easy to Control: soft push buttons is easy to operate, the large LCD display screen with bright backlight, convenient to check the measured data at a glance even in the dark environment. Dual Flashlights Design: two torch at the top for auxiliary lighting up the working area in the low lit or dark environment, not afraid of dark when working, and it will automatically turned off after about 5 minutes. Intelligent Multimeter with Multiple Functions: it can measure AC/DC current, AC/DC voltage, resistance, capacitance, temperature, frequency, continuity and diode test, fire wire detection, etc. Safety Operation: built-in overload conservation fuse, smart anti-burn. Meet the DC/AC 600V CAT III overvoltage standard, and double insulation conservation(class II). NCV Non-contact Voltage Detection: place the NCV sensor closer to the measured cable, and the multimeter can detect whether the voltage is greater than 90V AC voltage. When the AC voltage being detected, the meter buzzer alarms and the LCD analog bar displays the induction intensity.