Product Images
Arduino Mega2560 A000067 Board R3
Brand Arduino
New
In stock
Smart shoppers OnBuy it!
- Earn Cashback on every purchase – spend it instantly on your next order
- Free delivery – on millions of items across the site
- Customers love us – 135,000 Trustpilot reviews and an 'Excellent' rating
£44.05
FREE Delivery
1%
What is instant Cashback?
Learn More
Interest-free payment options available
See full product description & details
Delivery: Standard (Free) | Fri 9th - Sat 10th Oct
Sold by: Rapidonline
Returns: 30 days
180-day payment protection
You might also like
Description & Details
Arduino Mega2560 A000067 Board R3 Description
The Arduino Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adaptor or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.
- Microcontroller ATmega2560
- Operating voltage 5V
- Input voltage range nom. 7 to 12V
- Maximum supply voltage 6 to 20V
- Digital I/O pins 54 (of which 14 provide PWM output)
- Analog input pins 16
- DC Current per I/O pin 40 mA
- DC Current for 3.3V pin 50 mA
- Flash memory 256 KB of which 8 KB is used by bootloader
- SRAM 8 KB
- EEPROM 4 KB
- Clock speed 16 MHz
- USB Connector type B Male
Details
| OPC | PDV7P8Q |
|---|---|
| Brand | Arduino |
| Codes | 8058333490083 (EAN) |
| MPN | A000067 |
External product information
Disclaimer: The information below is provided by various external sources and should be used as a guide only.
The Arduino Mega 2560 is a microcontroller board based on the ATmega2560 (datasheet). It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.
The Mega 2560 is an update to the Arduino Mega, which it replaces.
The Mega2560 differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the ATmega16U2 (ATmega8U2 in the revision 1 and revision 2 boards) programmed as a USB-to-serial converter.
Revision 2 of the Mega2560 board has a resistor pulling the 8U2 HWB line to ground, making it easier to put into DFU mode.
Revision 3 of the board has the following new features:
- 1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible both with the board that use the AVR, which operate with 5V and with the Arduino Due that operate with 3.3V. The second one is a not connected pin, that is reserved for future purposes.
- Stronger RESET circuit.
- Atmega 16U2 replace the 8U2.
The Arduino Mega 2560 is a microcontroller board based on the ATmega2560 (datasheet). It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.
The Mega 2560 is an update to the Arduino Mega, which it replaces.
The Mega2560 differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the ATmega16U2 (ATmega8U2 in the revision 1 and revision 2 boards) programmed as a USB-to-serial converter.
Revision 2 of the Mega2560 board has a resistor pulling the 8U2 HWB line to ground, making it easier to put into DFU mode.
Revision 3 of the board has the following new features:
- 1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible both with the board that use the AVR, which operate with 5V and with the Arduino Due that operate with 3.3V. The second one is a not connected pin, that is reserved for future purposes.
- Stronger RESET circuit.
- Atmega 16U2 replace the 8U2.
Alternative names:
- Arduino Leiterplatten & Entwicklungskits development board 16 MHz ATmega2560
- Arduino Leiterplatten & Entwicklungskits development board 16 MHz ATmega2560
Detailed Product Information
Processor
| Processor frequency | 16 MHz |
|---|---|
| Processor model | ATmega2560 |
Weight & dimensions
| Weight | 36 g |
|---|---|
| Width | 53.3 mm |
| Depth | 101.5 mm |
Ports & interfaces
| Ethernet LAN | No |
|---|---|
| Wi-Fi | No |
| USB ports quantity | 1 |
| Number of analog I/O pins | 16 |
Power
| Input voltage (max) | 5 - 12 V |
|---|
Customers also buy
Compare Sellers for Arduino Mega2560 A000067 Board R3
- New from £44.05
| Seller | Ratings | Warranty | Returns | Price | Delivery | Total | Quantity |
|---|---|---|---|---|---|---|---|
| (199 reviews) | 12 months |
30 Days
Free Returns No
|
£44.05
|
+Fast & Free Delivery
Est. Delivery:
9th-10th Oct
|
£44.05
|
Earn as you shop with instant Cashback on everything.
No catch, no cost
- Paid into your OnBuy account
- Spend it on your next purchase
- Save it or withdraw it
Become a Cashback VIP
Just 1 purchase unlocks bigger deals & rates