Fingertip Pulse Oximeter Oxygen Saturation Level Meter Digital Display

Fingertip Pulse Oximeter Oxygen Saturation Level Meter Digital Display Description

Warm tips: Battery specifications: 2 AAA batteries (not included).  When the product does not respond after inserting the battery, please pay attention to check: 1.  Before using, pay attention to the positive and negative direction of thebattery.  2.  Make sure there is a red light inside before putting your finger to measure.

Notice:

The blood oxygen saturation varies with each person's breathing, and there is a slight difference in the blood oxygen saturation value of different fingers.  The oximeter test values are rough estimates only.  In order to accurately measure blood oxygen saturation, blood gas analysis is still required, that is, arterial blood needs to be drawn for corresponding detection.  In fact, the change of blood oxygen saturation is very large, and it changes almost at any time.  For example, if you do a little exercise, your body will consume oxygen, and the data will change.  As long as the value remains within the normal range, you need to hold your finger for a longer time during the test.  Looking at the average value will be most accurate.

Features:

1.  2-Direction Display adjustable.

2.  Reliable accuracy and durability.

3.  Automatic power off when no signal.

4.  Small and light weight, convenient to carry.

5.  Low voltage indicator, Real-time spot-checks.

6.  Widely used in hospital, home health care, oxygen bar, community medic centre, alpine area, sports health care etc.

Specifications:

Screen: LED

Color: blue+white

Material: plastic

Battery: 2 AAA batteries (not included)

Spo2 measuring range: 70%-99%

Spo2 accuracy: 70%-99%, ±2%, below 70% undefined

PR measuring range: 30~240BPM

PR measurement accuracy: ±1BPM/±1%

Battery specifications: 1.5V 2x AAA batteries (not included)

Package Included:

1x Fingertip Oximeter

Warm tips

1.  Before using, pay attention to the positive and negative direction of the battery.

2.  Make sure there is a red light inside before putting your finger to measure.