NEMA17 2-Phase 42 Stepper Motor 1.8 0.50Nm

NEMA17 2-Phase 42 Stepper Motor 1.8 0.50Nm Description

1、The front and rear covers are perfectly connected, the body is black electrophoresis, high‑end atmosphere, and the body size is standard. 2、The product can produce a high torsion‑to‑inertia ratio on the loaded shaft, and can eliminate system errors caused by the use of reduction gears. 3、The product surface is coated with imported rotor glue to prevent burrs on the surface after carbon steel oxidation and grinding, resulting in increased motor noise. 4、Imported high‑quality motor steel sheets, bearings made of German technology, low self‑inductance, good responsiveness. 5、The body is black electrophoresis, high‑end atmosphere, and the body size is standard.
Item Type: Stepper Motor
Material: Carbon steel
Purpose: Industrial motor control, transmission occasions
Step Angle: 1.8 degrees
Current: 1.8A
Holding Torsion: 0.50N.m
Resistance: 1.8Ω
Inductance: 3.2mH/phase
Length: Approx. 48mm / 1.9in
Number of Outlets: 4
Shaft Type: Milling single flat table
Step Angle Accuracy: 5% (full step)
Resistance Accuracy: 10% (20)
Inductance Accuracy: 20% (1KHZ)
Temperature Rise: 80 maximum(rated current, 2-phase energization)
Ambient Temperature: -20~+50
Insulation Resistance: 100MΩMin, 500VDC
Radial Clearance: 0.02mm maximum(450g load)
Axial Clearance: 0.08mm maximum(450g load)
Maximum Radial Load: 28N (20mm from flange surface)
Maximum Axial Load: 10N
1 x Stepper Motor