Rustins Quick Dry Small Job Gloss Pearl Grey 250ml

Rustins Quick Dry Small Job Gloss Pearl Grey 250ml Description

Rustins Quick Dry Small Job Gloss Pearl Grey is designed specifically for small painting projects. A water based hard wearing paint for interior and exterior use that is touch dry in approximately 30 minutes. A 250ml will cover approximately 3.25m². 

Intended Use: A decorative coating for application over Rustins Quick Drying Primer Undercoat or over existing paints and varnishes on wood and metal. For interior and exterior use. 

Type: A gloss acrylic emulsion based paint. The finish produced is tough, durable and resistant to oil and water.

Coverage 12-15m² per Litre depending on the absorbency of the surface

Finish: Gloss 

Colour: Pearl Grey 

Size: 250ml 

Usage Instructions: Preparation: The surface must be clean, smooth, sound, dry and free from wax, dust and contaminants. If the wood or metal surface is bare, apply the appropriate primer and undercoat before painting. On metal use Rustin's Red Oxide Metal Primer. On wood use Rustin's Quick Drying Primer & Undercoat. Prior to painting, existing coated surfaces should be cleaned with Rustin's Surface Cleaner, or Rustins Sugar Soap and sanded lightly to provide a key, prior to painting. Cracks may be filled with Rustin's Wood filler. Undercoat may be applied if required. 

Application: Apply light, even coats using a good quality brush for water-based coatingd.

Compatibility: Compatible over most types of undercoat. Can be applied over top coats once thoroughly cleaned and lightly sanded to provide a key

Clean-Up: Remove excess product from brushes before cleaning. Clean brushes whilst wet with water. Hard brushes can be cleaned with Rustins Brush Restorer. 

Coats: 1 coat is sufficient but a second coat may be applied if required. It is better to apply two light coats rather than one heavy coat.

Drying Time: Touch dry within 30 minutes, depending on the temperature and humidity.

Re-coating Time 3-4 hours, depending on the temperature and humidity.

Application Temp. Ideally, 15-25°C. Do not use below 10°C or in conditions of high humidity.