Rustins Strypit Paint and Varnish Stripper 5 Litre

Rustins Strypit Paint and Varnish Stripper 5 Litre Description

Rustins new formula Strypit is a non-caustic dichloromethane-free gel suitable for removing multiple coats of paints and varnishes applied to wood, metal, glass, stone and masonry surfaces. 

Type: Non Caustic. Dichloromethane free paint and varnish stripper. Intended Use: For removing paint, varnish, cellulose, polyurethane, emulsion, French Polish, lacquer and textured finishes from wood, metal, glass or plaster.

Special Features: Specially formulated to avoid stripping the attractive patina acquired through age on old furniture. Free from acid and caustic.

Rustins Strypit works best when applied liberally and allowed to penetrate after two applications. The gel consistency permits effective use on vertical surfaces.

Made in the UK

Coverage is approximately 5m² per Litre.

Size: 5 Litre

Usage Instructions:

1. Use appropriate personal protection including gloves and eye protection. Shake tin well and remove cap carefully holding the tin away from face. 

2. Brush on liberal coat with dabbing action. Leave until paint begins to soften or blistered, softened paint. Leave for a further 30 to 40 minutes. 

3. Remove the blistered, softened paint with a stripping knife or scraper. If any paint or vanish remains, repeat the process. Use steel wool to remove paint from curved surfaces. 

4. Wash down the surface thoroughly with water and allow to dry completely. On wood, white spirit can be used to wash down to avoid raising the grain. 

On old paint or heavy applications Strypit can be left on longer to maximise penetration.

The rate of coverage is approximately 5 square meters per litre

Cleaning up:

Collect waste in newspaper and dispose of safely in dustbin.

Clean brushes with warm soapy water.

Store in a cool dry place with lid tightly closed away from sources of ignition. Protect from frost.

Note: Not suitable on fibreglass, rubber and some plastics.