Shortwave Choke Magnetic Ring 1.8-54MHz Shortwave Radio, Anti-Interference 1:1 Current-Type Balun 200W

Shortwave Choke Magnetic Ring 1.8-54MHz Shortwave Radio, Anti-Interference 1:1 Current-Type Balun 200W Description

1. Always connect the choke directly to the shortwave radio output. All chokes should have a male (M) end.
2. Connect the other end of the choke directly to the feeder. If an antenna tuner is used, connect it before connecting to the feeder.
Features:
The purpose of the choke is to eliminate interference from common-mode current. Because the antenna, feeder, balun, and other components in our antenna and feeder system are not standard balanced systems, current will form in the feeder's shielding layer. This current is the interference signal, and it increases with increasing transmit power. This can lead to various strange problems when using FT8. Using chokes to suppress or eliminate common-mode current is a mature technology used in almost all equipment, such as EMI filters used in switching power supplies.
Excellent Anti-interference Performance
Designed specifically for 1.8-54MHz high-frequency radios
Powerful suppression of common-mode current, eliminating electromagnetic interference (EMI)
Ensures clean communication signals for field operations/competitions
High-Quality Materials & Durable Design
High-Temperature Resistance & Saturation Resistance, High Power Without Magnetic Degradation
M Male to M Female Connector
Direct Serial Connection of Radio and Feeder Cable, 3-Second Quick Installation
Applicable Scenarios:
Shortwave Communication/Antenna Grounding Optimization/RF Testing/Emergency Communication/Amateur Radio Competitions
Color: As Shown
Material: PCB
Specification: 200W

Package Contents:
1*Shortwave Choke Magnetic Ring