Cable Meter Wall Tester Open Short Circuit Detector Tool

Cable Meter Wall Tester Open Short Circuit Detector Tool Description

1、Detect the direction of the line buried in the wall, as well as the breakpoint and short‑circuit point of the line. 2、Test short circuits and deep circuits in underground circuits, and troubleshoot circuit breaks and short circuits. 3、It can find the short circuit and open circuit faults of underground water pipes and geothermal pipes, power supply lines. 4、You can find the fuse, the part where the fuse circuit is covered, and the junction box. 5、The cable tester has good performance, accurate testing and high stability.
Item Type: Cable Tester
Material: Plastic
Transmitter Technical Parameters
Output signal
125kHz
External voltage recognition voltage range
DC 12~400V2.5%; AC 12~400V(50~60Hz)2.5%
Temperature measurement technical indicators
2.5
Display screen
LCD with functional display and bar chart
External voltage dielectric strength
Maximum 400V AC/DC
Overvoltage category
CAT III 300V
Pollution level
2
Power supply
1 x 9V,IEC 6LR61(battery not included)
Power consumption
Minimum current
About 31mA
Maximum current
About 115mA
Fuse
F0.5 A 1000V,6.3x32mm / 0.2x1.3in
Temperature range
Working
Minus 10 to 50, maximum 80% relative humidity (non-condensing)
Store
Minus 20C to +60C, maximum 80% relative humidity (non-condensing)
Altitude
Maximum 2000mm / 78.7in
Size (height x width x depth)
Approx. 190x89x42.5mm / 7.5x3.5x1.7in
Receiver Technical Parameters
Tracking Depth
Tracking depth depends on the medium and specific application
Cable positioning mode
Unipolar application
About 0~2m / 6.6ft
Bipolar application
About 0~0.5m / 0~1.6ft
Separate loop
Up to 2.5m / 8.2ft
Network voltage identification
About 0~0.4m / 0~1.3ft
Display screen
LCD with functional display and bar chart
Power Supply
6 x 1.5V AAA, IEC LRO3(battery not included)
Power Consumption
Minimum current
About 32mA
Maximum current
About 89mA
Temperature range
Working
Minus 10 to 50, maximum 80% relative humidity (non-condensing)
Store
Minus 20C to +60C, maximum 80% relative humidity (non-condensing)
Altitude
Maximum 2000mm / 78.7in
Size (height x width x depth)
Approx. 241.5x78x38.5mm / 9.5x3.1x1.5in
1 x Transmitter (Battery Not Included)
1 x Receiver (Battery Not Included)
1 x T-Tool
2 x Serrated Clamp
1 Bag x Test Wire Pen (4Pcs)
1 x Black Packaging Bag
1 x Black Packing Bag Belt
1 x English Manual